If your full-size medals and your medal ribbon bar show different awards, a different order or different devices, something needs checking, and the fix is to check both against the same evidence rather than copying one set onto the other. A medal ribbon bar is meant to sit in the same order of wear as the medals it represents, so any mismatch is a sign that something changed, was missed or was built from a different source.[1]
This worksheet walks you through a medals and ribbon bar mismatch one position at a time: list what each set shows, compare it with the recipient's documents and the current order of wear, decide which set needs to change, and then rebuild the corrected set so both match. It does not decide entitlement. Entitlement is a matter for Defence or the relevant awarding authority, and Rack Builder's builder supports order and product configuration only.[5][12]
Why a medal ribbon bar and full-size set can disagree
Most mismatches have an ordinary cause. Knowing the likely cause tells you where to look first.
- The sets were made at different times. An award, clasp or device may have been added after one set was made. The current Australian Order of Wearing Honours and Awards was notified on 7 November 2025 and supersedes the schedule notified in 2007, so a set assembled earlier should be checked against the current schedule.[8][9]
- One set was built from memory or a chart. Defence notes that medal ribbon posters produced by commercial entities are a visual reference guide only and should not be used as an authority for wearing awards.[10]
- An award's position depends on the person. The 2025 schedule says the position of the Naval General Service Medal 1915-62 and the General Service Medal 1918-62 varies from person to person, depending on when the first clasp was earned.[9] A set built on a default position can disagree with one built on the recipient's actual clasp.
- Foreign awards were placed by different rules. The 2025 schedule says approved foreign awards are worn on the left after all Australian honours and awards, in the order of the date on which they were awarded, with some exceptions for Australian Defence Force personnel, who should consult their Service.[9] Defence's wearing guidance describes the order as the date of approval to wear.[10] If two sets used different dates, they will not match. Our guide to Australian and foreign medals in one order of wear covers this in more detail.
- Some insignia are not positioned in the order of wear. The Unit Citation for Gallantry, the Meritorious Unit Citation and the Group Bravery Citation are not positioned in the order; members of uniformed services wear them in accordance with their Service's dress rules. The Mentioned in Despatches is also not positioned, and Defence advises on wearing the emblem because the position is specific to the individual.[9] One set may include these and the other may not.
- Devices were added to one set only. Rosettes, emblems and devices attach to the specific ribbon they were awarded with, so a device can be missing from, or placed on the wrong ribbon of, one set.[1] See checking DLSM rosettes and Federation Stars for one common example.
Step 1: Record exactly what each set shows
Lay both sets face up in good light and write down what you see, in position order, before you change anything. Avoid working from a mirror selfie, because a mirror reverses left and right.
The 2025 schedule states that insignia are worn with the highest-ranking award closest to the centre of the chest.[9] Start each list from that end, so position 1 on the full-size set lines up with position 1 on the ribbon bar. Ribbon bars are made in rows, three wide in Navy style or four wide in Army and Air Force style, so record the row and place of each ribbon as well as its overall position.[1]
Step 2: Fill in the reconciliation worksheet
Copy this table, add one row per award, and fill it in from the two sets and the recipient's documents.
| Position | Full-size set shows | Ribbon bar shows | Clasps or devices on each | Source document | Result |
|---|---|---|---|---|---|
| 1 | Award name | Award name | Full-size clasp; ribbon device | Document name and date | Match, differs or query |
| 2 | |||||
| 3 |
The source column is the most important one. Use the recipient's award documents, service record or official correspondence, not the other set and not a ribbon chart.[10] If a row has no source, mark it as a query rather than guessing.
Step 3: Decide which set is right, row by row
Work through each row marked "differs" or "query".
- Award present on one set only. Check the document for that award. If the award is confirmed, the other set needs it added. If you cannot find a document for it, do not add it to either set yet. Read what to do when a service record does not list every medal, and ask Defence or the relevant awarding authority.
- Same awards, different order. Check the current schedule for the award category. Australian and Imperial honours and awards are positioned together as set out in the Schedule and its Annexes, and approved foreign awards are worn after all Australian honours and awards.[9][10] Defence also states that Imperial British honours and awards issued before 5 October 1992 are considered Australian awards.[10]
- Clasp or device differences. Clasps sit on the full-size ribbon, while the ribbon bar shows any device on the relevant ribbon.[1][2] For some medals, including the Police Overseas Service Medal, the Humanitarian Overseas Service Medal, the National Emergency Medal and the two general service medals above, the 2025 schedule says clasps are worn on the ribbon in order of date of approval.[9] If the issue is a Defence Long Service Medal clasp, see a fifth DLSM clasp on the full-size and ribbon-bar sets.
- Two awards that should not appear together. If both sets, or one set, show both a Defence Force Service Medal and a Defence Long Service Medal, read our guide to replacing a DFSM with a DLSM before changing either set.
If two reliable sources still point in different directions after this step, stop and send the evidence for review rather than choosing the version you prefer.
Step 4: Rebuild once, then make both formats from the same list
Once every row is resolved, build the corrected award list in one place and produce both formats from it.
In the Rack Builder builder, choose the award type and country first, because that sets the award and order of wear rules the builder uses.[4] Add the awards and clasps from your worksheet; each medal record in the library lists its approved clasps, and the builder places them on the ribbon.[2] Rack Builder arranges awards using the selected jurisdiction, current published guidance and award-specific rules, and flags unusual or conflicting groups for manual review before production.[5]
Ribbons follow the same published order of wear as the medals.[1] If you already have a saved full-size rack, the miniature page explains that you can load the saved medal selection, choose Miniatures and keep the award order consistent across both sets; the site does not describe the same step for ribbon bars, so ask Support if you want to reuse a saved rack for one.[3][6] Choose whether you need new full-size medals, a new ribbon bar, or both. An account is needed to save a rack, and saved racks expire after 90 days, so keep your own copy of the worksheet.[4]
If the ribbons on an older set are faded or worn rather than wrong, that is a different problem. Defence's guidance on caring for medals says a medal dealer or mounter will be able to assist where a ribbon is badly deteriorated and needs to be replaced, and Medals of Australia explains how to care for silk, rayon and synthetic medal ribbons.[11]
A worked example of a medals and ribbon bar mismatch
This is a hypothetical example, not a real customer, and it does not determine anyone's entitlement.
A retired member's full-size set shows four medals. Their ribbon bar, made years later, shows five ribbons, with a foreign award sitting in a different place. Using the worksheet, they record both sets from the end closest to the centre of the chest. Rows 1 to 3 match. Row 4 differs: the ribbon bar includes an award their documents confirm was issued after the full-size set was made, so the full-size set needs it added. Row 5 is the foreign award. The two sets used different dates, and the member served in the ADF, so they check with the relevant Service, which the 2025 schedule advises ADF personnel to consult on foreign awards.[9] They rebuild the group in Rack Builder from the worksheet, ask the team to review the foreign award position, and order a full-size set and ribbon bar from the same list.
What to check, and what to send if you have a question
- Both sets listed in position order from the end closest to the centre of the chest[9]
- A source document for every award, clasp and device, not a ribbon chart[10]
- The correct award type and country selected in the builder[4]
- Foreign awards, unit citations and any Mentioned in Despatches emblem checked separately[9]
- Devices placed on the ribbon they belong to[1]
- Row style for the ribbon bar: three wide (Navy) or four wide (Army and Air Force)[1]
Share only what is needed. You do not need to send a full service record or personal identifiers to ask about a mismatch. A short enquiry like this is usually enough:
"My full-size set and ribbon bar disagree at position [number]. The awards are [award names]. My saved rack reference is [reference]. My source for this award is [document name]. I need the corrected set by [date]."
Where to get help
The Rack Builder How it works page sets out the four building steps, and the FAQ covers order of wear, product formats and orders.[4][5] For a question about a saved rack or a mismatch, use the Support page and include your saved rack reference or order number, or call (02) 6123 2996.[6] Ribbon bars and custom racks are made to order, so check Shipping and returns: change of mind does not apply to custom items, and a required date does not confirm delivery until the team accepts the production schedule.[6][7]
If your sources still disagree on the order, read our guide to conflicting medal order of wear advice before you order.
When your worksheet is complete, build the corrected set in Rack Builder and review the finished arrangement before checkout.[1][4]
Frequently asked questions
Why does my medal ribbon bar not match my full-size medals?
Common causes are sets made at different times, a set built from memory or a ribbon chart, awards whose position depends on the individual, foreign awards placed by different dates, and devices added to one set only. The current Australian Order of Wearing Honours and Awards was notified on 7 November 2025, so check both sets against it and against the recipient's documents.[8][9][10]
Should a ribbon bar follow the same order of wear as the medals?
Yes. Rack Builder arranges ribbons in the same published order of wear as the mounted medals. The 2025 schedule states that insignia are worn with the highest-ranking award closest to the centre of the chest, so compare both sets starting from that end.[1][9]
Which set should I trust when they disagree?
Neither, until you check. Use the recipient's award documents, service record or official correspondence as the source, not the other set. Defence notes that commercial medal ribbon posters are a visual reference only and are not an authority for wearing awards. If reliable sources conflict, send the evidence for review.[10]
Where do foreign awards go on a ribbon bar?
After all Australian honours and awards. The 2025 schedule says approved foreign awards are worn in the order of the date they were awarded, with some exceptions for ADF personnel, who should consult their Service. Defence's wearing guidance refers to the date of approval to wear, so check which applies to the wearer.[9][10]
Do unit citations belong in the order of wear?
No. The 2025 schedule says the Unit Citation for Gallantry, the Meritorious Unit Citation and the Group Bravery Citation are not positioned in the Australian Order of Wearing Honours and Awards. Members of uniformed services wear them in accordance with their Service's dress rules.[9]
Can I make a matching ribbon bar from a saved full-size rack?
Ribbons follow the same published order of wear as the medals. Rack Builder's miniature page explains loading a saved medal selection to make a matching miniature set, but the site does not describe this for ribbon bars, so ask Support. An account is needed to save a rack, and saved racks expire after 90 days, so keep your own copy of the award list.[1][3][4][6]
Sources
Source pages reviewed 13 October 2026. Numbered citations in the article open the sources below.
- Rack Builder: Custom Ribbon Bars and Order of Wear Ribbons follow the medals' published order of wear; Navy three per row, Army and Air Force four per row; devices attach to the relevant ribbon.
- Rack Builder: Full-size Medals Clasps listed per medal record and placed on the ribbon by the builder.
- Rack Builder: Miniature Medals Load a saved medal selection, choose Miniatures and keep the award order consistent.
- Rack Builder: How it works Four building steps; account needed to save; saved racks expire after 90 days.
- Rack Builder: FAQ Arrangement by jurisdiction, published guidance and award-specific rules; unusual or conflicting groups flagged for manual review.
- Rack Builder: Support Saved rack reference or order number; phone (02) 6123 2996; required dates.
- Rack Builder: Shipping and returns Change of mind does not apply to custom items; required date not confirmed until the production schedule is accepted.
- Governor-General: Australian Order of Wearing Honours and Awards Schedule dated 15 October 2025; Gazette C2025G00607 notified 7 November 2025.
- Federal Register of Legislation: The Australian Order of Wearing Honours and Awards 2025 (C2025G00607) Schedule, Annex 1 and notes, 7 November 2025.
- Department of Defence: Wearing honours and awards Foreign awards by date of approval to wear; commercial ribbon posters not an authority; Imperial awards before 5 October 1992.
- Department of Defence: Caring for medals A medal dealer or mounter can assist where a ribbon is badly deteriorated.
- Rack Builder: About Builder supports order and product configuration; does not determine entitlement.



