A medal presentation frame is easiest to get right when you settle seven things before you open the builder: who the frame honours, whether it will hold replicas or originals, the confirmed award list, the frame size, the photo and plaque, where it will hang, and the date you need it. Rack Builder frames are built around the medal group you configure, finished with an engraved plaque and reviewed before production.[1][2]
Plaque wording is covered in detail in our separate engraving guide. Nothing here is an entitlement decision. Rack Builder's FAQ says common groups are a starting point only and advises checking the recipient's service record, award documents or relevant authority before ordering.[4]
1. Decide what the frame is for and who it honours
Start with the purpose: a retirement, a family commemoration or a unit farewell. Write one sentence that answers "who is this for, and why now?"
Then confirm the recipient record. If you are planning for a relative, agree on the full name, service and award list with the family before you order. Rack Builder's FAQ notes that a relative's medal entitlements can be researched by applying to the Honours and Awards division of the Department of Defence, and that the National Archives of Australia website can be used to research a relative's service history with a service number or full name.[4]
If the display must honour more than one person, or combine medals with citations and badges, plan that before committing to one frame.
2. Decide whether the frame will hold replicas or originals
This is the most important conservation decision on the list. Rack Builder frames are configured around the replica medal group you build in the builder. Customer-supplied original medals can also be framed, arranged through the Support page, the same specialist route as original mounting.[2]
Heritage guidance favours keeping originals out of permanent wall display. The Australian War Memorial advises keeping medals clean and dry, and away from extremes of temperature, humidity and light, and notes that ribbons are vulnerable to light and are best stored in the dark.[9]
Defence guidance on caring for medals states that replica medals may be purchased to be worn or displayed while original medals are safely stored.[8]
Centenary of ANZAC Tasmania guidance goes further, advising that medals should not be placed into picture frames for permanent hanging.[11]
A practical approach is a replica frame on the wall and the originals stored in a hoop pine plywood or acid-free cardboard box, wrapped in acid-free tissue or undyed cotton or linen.[8][9]
If you still want originals framed, contact Rack Builder Support first and ask a conservator about the risks.
3. Confirm the award list and order of wear
A frame is a permanent record, so the arrangement matters as much as on a jacket. The order of wearing Australian honours and awards is determined by the Governor-General.[7]
The current Australian Order of Wearing Honours and Awards shown on the Governor-General's website is the Schedule of 15 October 2025, notified in the Commonwealth of Australia Gazette on 7 November 2025.[6]
Foreign awards are worn after all Australian honours and awards, in order of the date of approval to wear.[7]
In the Rack Builder builder, the first step is choosing an award type ("National and Military Awards" or "Civil and Service Awards") and country, which sets the award and order of wear rules the builder uses.[1]
After checkout, the team reviews the saved rack against the selected jurisdiction and published order of wear guidance, and contacts you when an award, clasp, layout or personal detail needs clarification.[1]
Unusual or conflicting groups are flagged for manual review before production.[4]
Before you start, have the recipient's award list or service record and any clasp details ready.[1]
Common groups are a starting point only and do not confirm entitlement.[4]
4. Match the frame size to the medal count
Frame size follows the number of medals. Rack Builder frames are built in configurations from 1 to 12 medals, crafted from premium timber, and the final external size appears in the builder before checkout.[2]
The published sizes are below.[2][3]
| Frame | Holds | Dimensions |
|---|---|---|
| Small Medal Frame | Up to 4 medals | 285 x 285 mm |
| Medium Medal Frame | 5 to 8 medals | 460 x 300 mm |
| Large Medal Frame | 9 to 12 medals | 650 x 320 mm |
| Small Photo Frame | Up to 4 medals | 400 x 285 mm |
| Medium Photo Frame | 5 to 8 medals | 570 x 285 mm |
| Large Photo Frame | 9 to 12 medals | 750 x 285 mm |
Measure the wall space before you choose, and compare the medal frame and photo frame in the builder. If the group has more than 12 medals, ask Support before ordering, because the published configurations stop at 12.[2]
5. Decide on the photograph, mat colour and plaque
Photograph. A photo frame combines a service photograph, the medal group and an engraved plate in one display.[3]
The photo frames are designed to fit a standard 4 x 6 photo (100 mm wide x 150 mm high). Upload a JPEG or PNG sized to at least 1200 pixels wide by 1800 pixels high, and avoid screenshots, compressed social media copies and images with important details close to the edge.[3]
The team checks image quality, crop and layout before production, and contacts you if the photograph will not display or print properly.[3]
If the only photo is an old original, scan it and store the original; State Library of Queensland guidance suggests framing a good quality reproduction instead.[10]
Mat colour. The live pages describe blue and green mat board options, so confirm the exact colour in the builder preview when you order.[2][3]
Plaque. You can enter three lines of text, each holding 22 characters including spaces. Suitable content includes name, service number, rank, unit, service dates or a short dedication. Keep wording concise for clear engraving, and check the preview for spelling and line breaks.[2][4]
6. Plan where the frame will hang
Even a replica frame lasts longer in the right spot. Rack Builder frames are glazed in clear acrylic, described as a lighter and safer choice than glass for wall display and transit, and each frame is finished and checked before dispatch, ready for wall display.[2]
Rack Builder's published pages do not state that the glazing is UV filtering, so do not assume it.
State Library of Queensland framing guidance recommends hanging framed objects away from direct sunlight and other intense light or heat sources such as fireplaces, heaters and exhaust vents, and on interior walls that are not susceptible to changes in temperature or moisture.[10]
Centenary of ANZAC Tasmania guidance also warns against displaying textiles under spot lights or near windows.[11]
Ribbons are textiles, so the same care applies to the ribbons in a frame.
7. Work back from the presentation date
Enter the event or presentation date at checkout. A required date does not confirm delivery until the team accepts the production schedule, and if a date is close, call before ordering.[5]
Current production guidance is in the Rack Builder FAQ, and the Support page points to the Shipping and returns page for production and delivery guidance.[4][5]
Allow time for the review step, in case the team needs to clarify a detail with you.[1]
A worked example: planning a retirement presentation frame
This is a hypothetical example, not a real customer order or an entitlement assessment.
A unit is presenting a frame to a warrant officer at a farewell. The organiser confirms the award list with the member's own records, and the frame will hold replicas. The group has six medals, which points to the Medium size band.[2]
The member has a strong service portrait, so the organiser chooses a Medium Photo Frame and checks that the wall at the venue can take a frame of 570 x 285 mm. The organiser obtains the original camera file, not a social media copy.[3]
For the plaque, the organiser drafts three short lines (name and post-nominals, rank and unit, and service years), counts each line against the 22-character limit, then checks the preview.[2]
The award type and country are set first, the medals are added, and a second person checks spelling in the saved rack.[1]
Because the farewell is close, the organiser calls Rack Builder before ordering and enters the date at checkout.[5]
Final checklist before you order
Run through this list before you check out.
- Purpose agreed and recipient record confirmed with the family or the member.
- Replicas or originals decided; if originals, Support contacted first.[2]
- Award list and clasps checked against the recipient's records, not a common group alone.[4]
- Correct award type and country selected in the builder.[1]
- Frame size matches the medal count and the wall space.[2][3]
- Photograph supplied as an original JPEG or PNG at the published minimum size, if using a photo frame.[3]
- Mat colour checked in the builder preview.[2]
- Plaque wording fits three lines of 22 characters, with spelling checked in the preview.[2]
- Hanging spot chosen away from direct sun and heat sources.[10]
- Presentation date entered at checkout, with a call made first if the date is close.[5]
- Only the personal details needed for the frame shared; no full service record sent unless Support asks for it.
Where to get help with a Rack Builder frame
Start with How it works for the four steps and what to have ready, and the FAQ for frame, photo and plaque questions.[1][4]
For original medals, more than 12 medals or a tight date, use the Rack Builder Support form and include your saved Rack Builder reference or order number.[5]
A short enquiry is enough:
"Hello, I am planning a [medal frame / photo frame] for [recipient name] with [number] medals for a presentation on [date]. My saved Rack Builder reference is [reference]. Could you confirm [question, e.g. whether original medals can be framed / the right size for this group]?"
Payment is taken at checkout on Medals of Australia or Military Shop, depending on which store you choose when you finish your rack.[4]
If you are still confirming the award list, our guide to building a medal rack from a service record explains how to work from the recipient's official record.
Frequently asked questions
What should be on a medal presentation frame checklist?
A medal presentation frame checklist should cover seven things: who the frame honours, whether it will hold replicas or originals, the confirmed award list, the frame size, the photo and plaque, where it will hang and the date you need it. Settling all seven before you open the Rack Builder builder makes the frame easiest to get right.
Should I put original medals in a presentation frame?
Heritage guidance favours keeping originals out of permanent wall display. Defence guidance says replica medals may be purchased to be worn or displayed while original medals are safely stored, and Centenary of ANZAC Tasmania guidance advises against placing medals in picture frames for permanent hanging.[8][11]
If you still want originals framed, contact Rack Builder Support first and ask a conservator about the risks.[2]
What size medal frame do I need for six medals?
Six medals fall in the Medium size band, which holds 5 to 8 medals. On Rack Builder, the Medium Medal Frame is 460 x 300 mm and the Medium Photo Frame is 570 x 285 mm.[2][3]
The final external size appears in the builder before checkout, so measure your wall space and compare the medal frame and photo frame there.[2]
What photo works best in a medal and photo frame?
Use an original scan or camera file. Rack Builder photo frames fit a standard 4 x 6 photo (100 mm wide x 150 mm high), uploaded as a JPEG or PNG of at least 1200 by 1800 pixels.[3]
Avoid screenshots, compressed social media copies and images with important details close to the edge. If the only photo is an old original, scan it and store the original.[10]
Where is the best place to hang a medal frame at home?
Hang it away from direct sunlight and other intense light or heat sources, such as fireplaces, heaters and exhaust vents, on an interior wall that is not susceptible to changes in temperature or moisture.[10]
Avoid spot lights and windows too, because medal ribbons are textiles and are vulnerable to light.[9][11]
Does a medal frame confirm which medals someone is entitled to?
No. A Rack Builder frame is not an entitlement decision, and common groups are a starting point only, so check the award list against the recipient's service record, award documents or relevant authority before ordering.[4]
To research a relative's entitlements, the Rack Builder FAQ points to the Honours and Awards division of the Department of Defence and the National Archives of Australia.[4]
Sources
Source pages reviewed 13 October 2026. Numbered citations in the article open the sources below.
- Rack Builder: How it works Build your medal rack in four clear steps; what to have ready and the review after checkout.
- Rack Builder: Medal display frames Medal display frames built around your service: 1 to 12 medals, sizes, acrylic glazing, plaque and original medals.
- Rack Builder: Photo and medal frames Photo and medal frames for a complete service display: sizes, photo requirements and image checks.
- Rack Builder: FAQ Common groups, researching a relative's medals, manual review, plaque limits, production and payment.
- Rack Builder: Support Help with your rack, order or product; required dates and the Shipping and returns page.
- Governor-General: Australian Order of Wearing Honours and Awards Schedule of 15 October 2025, notified in the Gazette on 7 November 2025.
- Department of Defence: The Order of Wearing Australian Honours and Awards Order of wearing determined by the Governor-General; position of foreign awards.
- Department of Defence: Caring for medals Replicas for wear or display while originals are safely stored; storage boxes and wrapping.
- Australian War Memorial: Conservation advice: Medals Last updated 22 December 2020; light, temperature, humidity and ribbon storage.
- State Library of Queensland: Caring for your collections: Matting and framing (PDF) Last updated June 2025; framing a reproduction and where to hang framed objects.
- Centenary of ANZAC Tasmania: Caring for military memorabilia, medals and photos Medals should not be placed into picture frames for permanent hanging; avoid spot lights and windows.



