If the full medals are lost, damaged, held by another family member or still being replaced, a ribbon bar lets the recipient's awards be represented in the correct order of wear without the medals themselves. Rack Builder describes a ribbon bar as a way to represent awards "without the full medal", with the ribbons sitting in rows in the same order of wear as the medals.[1] The steps below explain how to work out why the medals are unavailable, build the award list from evidence, choose the row style and backing, and check the arrangement before you order.
A ribbon bar is not a substitute for an official replacement, and it does not confirm entitlement. Entitlement is decided by Defence or the relevant awarding authority, not by a retailer, and Defence handles replacement of eligible service and campaign medals.[10][11] Rack Builder's role is to arrange the awards you select against the chosen jurisdiction and published order of wear guidance.[3]
Step 1: Work out why the full medals are unavailable
The reason matters, because it changes what you should do alongside ordering ribbons. Common situations include:
- The medals were lost, stolen or damaged. Defence publishes guidance on replacement medals, including who can apply and which awards it replaces.[10]
- The originals are held by another relative. Families often keep the originals with one person and use replicas or ribbons elsewhere. Rack Builder notes that replicas were introduced to preserve original medals and avoid family disputes over the original set.[3]
- The originals are too worn to wear. Defence's FAQ says a badly deteriorated ribbon can be replaced with help from a medal dealer or mounter.[11]
- The recipient only wants something for day wear. Rack Builder lists ribbon bars as best for "day wear without the full medals", and its home page notes you can order for your own medals or a family member's, "a full set or a single ribbon".[2][7]
If loss or damage is the reason, read Defence's replacement medals page before you do anything else. It states that Defence replaces service and campaign medals in certain circumstances, that some awards, including honours and decorations and the National Medal, are not replaced by Defence, that replacements are not issued until two months after the date of loss, and that replacements which cannot be returned are engraved with a "D" for duplicate.[10] Defence's FAQ adds that living recipients are entitled to one replacement set where the loss was beyond their control.[11] Check the current page for the conditions that apply to your situation, because this article does not assess any individual application.
Step 2: Build the award list from documents, not memory
A ribbon bar is only as accurate as the list behind it. Use the recipient's award documents, service record or official correspondence. Rack Builder asks for the recipient's award list or service record, plus any clasp details, before you start.[2] Its common groups are a starting point only and do not confirm entitlement.[3]
Avoid building the list from a ribbon chart or poster alone. Defence notes that medal ribbon posters produced by commercial entities are a visual reference only and should not be used as an authority for wearing awards.[9] If you are unsure whether an award was issued, or what it was, Defence's FAQ and medal pages are the place to start, not the ribbon bar order.[11]
You do not need to send a full service record to Rack Builder to order a ribbon bar. Enter the awards in the builder and keep your documents on hand in case the team needs to clarify an award, clasp or layout.[2][4]
Step 3: Decide where a ribbon bar fits among the formats
A ribbon-only set suits some occasions and not others. Official guidance describes full-size and miniature insignia for events where decorations are prescribed, so check the event's dress requirements before relying on ribbons alone. The table compares the three formats as each source describes them.
| Format | How Rack Builder describes it | What official guidance says |
|---|---|---|
| Full-size medals | Ceremonial wear, commemorative events and display[2] | The full-size insignia is generally worn at day functions where decorations have been prescribed[8] |
| Miniature medals | Formal and mess dress settings where the relevant dress guidance permits them[3][6] | The miniature insignia is generally worn at evening receptions and dinners where decorations have been prescribed[8] |
| Ribbon bar | Day wear without the full medals; represents awards without the full medal[1][2] | PM&C notes that some awards come with a ribbon bar, and that Imperial award recipients can choose to purchase miniatures and ribbon bars[8] |
If an invitation or service dress rule asks for medals, a ribbon bar may not meet it. In that case, ask the organiser, and consider whether a replacement or a replica set is the better path. Defence's FAQ states that Defence cannot provide replica medals and that replicas can be bought from reputable medal dealers.[11]
Step 4: Choose the row style and backing
Rack Builder offers two row styles: Navy style, three ribbons per row, or Army and Air Force style, four ribbons per row. The builder groups the ribbons into rows automatically and shows the finished width.[1] Choose the style that matches the wearer's service dress rules, and if you are unsure, check with the relevant service before ordering.
The ribbon bar page lists four backing options: pin-back with clutch pins, pin-back with a clear plastic covering, MagnaRack magnetic backing that holds the bar without pinning through the garment, and magnetic backing with the clear covering.[1] Magnetic backing can suit a jacket you do not want to pierce, while a covering helps protect the ribbons. The configured price is shown in the builder before checkout.[1]
Step 5: Add devices to the right ribbon
Rosettes, emblems and devices attach to the specific ribbon they were awarded with. Rack Builder lets you add them in the builder for an extra cost and asks you to review the selection before checkout.[1] Take device details from the recipient's documents, not from photos of someone else's ribbon bar.
If a device, clasp or award is not listed, report it through Rack Builder's missing medal form with the full award name, issuing authority and a reliable source.[2]
Step 6: Check the order of wear before you order
Ribbons follow the same published order of wear as the medals.[1] In Australia, the Governor-General's Australian Order of Wearing Honours and Awards details the position in which honours and awards should be worn.[12] The current instrument was notified in the Commonwealth of Australia Gazette on 7 November 2025 (C2025G00607).[12][13]
Rack Builder sets the award and order of wear rules from the award type and country you choose in the first step of the builder.[2] Unusual or conflicting combinations are flagged for manual review before production.[1][3] After checkout, the team reviews the saved rack and contacts you when an award, clasp, layout or personal detail needs clarification.[2]
Step 7: Plan for the medals that may come later
A ribbon bar is often the first part of a larger set. If replacements are issued or the originals are recovered, you may later want full-size or miniature medals in the same order. Miniatures follow exactly the same order of wear as the full-size set, so the medal order only needs to be built once.[6] Rack Builder's fitted presentation case holds a full-size set, miniature set and ribbon bar together.[3]
Saving the rack helps here, but plan around its limits. An account is needed to save a rack, and saved racks expire after 90 days.[2] Keep your own copy of the award list with the documents you used.
A worked example of a ribbon-only set
This is a hypothetical example, not a real customer, and it does not determine anyone's entitlement.
A former Army member's full-size medals were damaged in a house move. They have their award documents and want to keep wearing something on day dress while they look into a replacement. First, they read Defence's replacement medals page and note the two-month waiting period after a loss.[10] Next, they enter the awards in Rack Builder from their documents rather than from a ribbon poster.[2][9] They choose Army and Air Force style, four ribbons per row, and magnetic backing with the clear covering.[1] They add one device from their documents and review it before checkout.[1] The builder flags nothing unusual, so they order, and they keep the saved rack in mind for a full-size set if the replacement does not suit, remembering that saved racks expire after 90 days.[2]
What to check, and what to send if you have a question
- The reason the full medals are unavailable, and whether Defence's replacement guidance applies[10][11]
- An award list taken from documents, not a ribbon chart[9]
- The correct award type and country selected in the builder[2]
- Row style: three wide (Navy) or four wide (Army and Air Force)[1]
- Backing and covering choice[1]
- Each device placed on the ribbon it belongs to[1]
- Whether the event or dress rule calls for medals rather than ribbons[8]
Share only what is needed. You do not need to send a full service record or personal identifiers to ask about a layout. A short enquiry like this is usually enough:
"I am building a ribbon-only set for [recipient: self or relative] under [service or jurisdiction]. My saved rack reference is [reference]. I am unsure about [award, device or row style]. My source for this award is [document name]. I need it by [date]."
Where to get help with a Rack Builder ribbon bar
Start with the Rack Builder How it works page, which sets out the four building steps, and the FAQ, which covers order of wear, product formats and orders.[2][3] For a question about a saved rack, a device or a row style, use the Support page and include your saved rack reference or order number.[4] Ribbon bars are custom made to your award selection, so check Shipping and returns for current production guidance and note that change of mind does not apply to custom items such as ribbon bars.[5] A required date entered at checkout does not confirm delivery until the team accepts the production schedule; if a date is close, call (02) 6123 2996 before ordering.[4][5]
If an invitation asks for decorations, read what decorations wording means for your medal format before relying on ribbons alone.
When you are ready, build the ribbon bar in the Rack Builder builder and review the finished arrangement before checkout.[1]
Frequently asked questions
Can I wear a ribbon bar if my full medals are lost or damaged?
A ribbon bar can represent your awards in the correct order of wear without the full medals, but it is not an official replacement and does not confirm entitlement. If your medals were lost, stolen or damaged, also read Defence's replacement medals page, because Defence handles replacement of eligible service and campaign medals.[1][10]
How do I build a ribbon only medal set in the right order of wear?
Build the award list from the recipient's award documents or service record, not a ribbon poster, then select the correct award type and country in the Rack Builder builder, which sets the award and order of wear rules. Ribbons follow the same published order of wear as the medals, and unusual combinations are flagged for manual review.[1][2][9]
How long does Defence take before issuing replacement medals?
Defence does not issue replacements until two months after the date of loss. Living recipients are entitled to one replacement set where the loss was beyond their control, and some awards, including honours and decorations and the National Medal, are not replaced by Defence. Check the current Defence page for the conditions that apply to your situation.[10][11]
Is a ribbon only set acceptable when an invitation asks for medals?
Not always. PM&C guidance says full-size insignia is generally worn at day functions, and miniatures at evening receptions and dinners, where decorations have been prescribed. If an invitation or service dress rule asks for medals, a ribbon bar may not meet it, so ask the organiser and consider whether a replacement or replica set is the better path.[8]
How many ribbons go on each row of a ribbon bar?
Rack Builder offers Navy style with three ribbons per row, or Army and Air Force style with four ribbons per row. The builder groups the ribbons into rows automatically and shows the finished width. Choose the style that matches the wearer's service dress rules, and if you are unsure, check with the relevant service before ordering.[1]
Can I use a medal ribbon chart to work out which ribbons to wear?
No. Defence notes that medal ribbon posters produced by commercial entities are a visual reference only and should not be used as an authority for wearing awards. Take the award list from the recipient's award documents, service record or official correspondence, and take device details from those documents rather than from photos of someone else's ribbon bar.[1][9]
Can I add miniature or full-size medals later in the same order?
Yes. Miniatures follow exactly the same order of wear as the full-size set, so the medal order only needs to be built once. Keep your own copy of the award list, because an account is needed to save a rack and saved racks expire after 90 days. Rack Builder's fitted presentation case holds a full-size set, miniature set and ribbon bar together.[2][3][6]
Sources
Source pages reviewed 13 October 2026. Numbered citations in the article open the sources below.
- Rack Builder: Custom Ribbon Bars and Order of Wear Ribbons without the full medal; row styles, backing options, devices and manual review.
- Rack Builder: How to Build and Order a Medal Rack (How it works) Four building steps, what to have ready, saved racks and post-checkout review.
- Rack Builder: FAQ Common groups, replicas, manual review, miniatures and the fitted presentation case.
- Rack Builder: Support Enquiries with a saved rack reference or order number; required dates.
- Rack Builder: Shipping and Returns Ribbon bars are custom made; change of mind does not apply; required dates.
- Rack Builder: Miniature Medals for Formal Wear Miniatures follow the same order of wear as the full-size set.
- Rack Builder: Home page Your medals or a family member's, a full set or a single ribbon (page metadata 19 August 2026).
- PM&C: Wearing awards Released 24 June 2016; full-size and miniature insignia, ribbon bars and Imperial awards.
- Department of Defence: Wearing honours and awards Commercial ribbon posters are a visual reference only, not an authority for wearing awards.
- Department of Defence: Replacement medals Awards Defence replaces and does not replace; two-month wait; "D" for duplicate.
- Department of Defence: Frequently asked questions (Honours and Awards) One replacement set where loss was beyond the recipient's control; ribbon replacement; replicas.
- Governor-General: Australian Order of Wearing Honours and Awards Schedule dated 15 October 2025; Gazette C2025G00607 notified 7 November 2025.
- Federal Register of Legislation: The Australian Order of Wearing Honours and Awards 2025 (C2025G00607) Notified 7 November 2025.



